Baker in Virginia
Member
Good Evening ,
I should know more about Solid State Relays . I have
a system with 8) 120 vac Vibrators . These Solid State
Relays have a 4-32 VDC Input . The analog input is reading
24 vdc , but none of these Vibrators will work .
To begin with , what really does the 4-32 VDC mean ? Any
voltage 4 to 32 volt will trigger the Solid State Relay ? There are
Diodes on the wires going out to the Vibrators . I took the wires
off the Solid State Relays , and placed the wires on a 120 VAC terminal
and all 8 Vibrators run. Depending on the 4-32 VDC output from the output
of the PLC , does that determine how much of the 120 vac , pass through to
the Vibrator ? Thanks so much for your help .
I should know more about Solid State Relays . I have
a system with 8) 120 vac Vibrators . These Solid State
Relays have a 4-32 VDC Input . The analog input is reading
24 vdc , but none of these Vibrators will work .
To begin with , what really does the 4-32 VDC mean ? Any
voltage 4 to 32 volt will trigger the Solid State Relay ? There are
Diodes on the wires going out to the Vibrators . I took the wires
off the Solid State Relays , and placed the wires on a 120 VAC terminal
and all 8 Vibrators run. Depending on the 4-32 VDC output from the output
of the PLC , does that determine how much of the 120 vac , pass through to
the Vibrator ? Thanks so much for your help .