Hey guys, I have probably gone through 3 different forums looking every type of answer anywhere close to what I have, and I just cannot find a solution for my specific issue.
I have an AB PV600 2711-B6C1, which on boot Error 24s on me. It has RS232/RIO/Touchscreen/Keypad, and I have tried < + > buttons to boot to config, even trying the PVP config CF card trick (knew it wouldnt work, but worth a try). Tried connecting through Panelbuilder/WinPFT to communicate (using straight through and a NM cable) and I just get nothing. RSLinx as DF1 and 1747-PIC / AIC+ driver setups, and still nothing.
Any thoughts for something like this. What am I missing here.
Thanks for the help in advance.
I have an AB PV600 2711-B6C1, which on boot Error 24s on me. It has RS232/RIO/Touchscreen/Keypad, and I have tried < + > buttons to boot to config, even trying the PVP config CF card trick (knew it wouldnt work, but worth a try). Tried connecting through Panelbuilder/WinPFT to communicate (using straight through and a NM cable) and I just get nothing. RSLinx as DF1 and 1747-PIC / AIC+ driver setups, and still nothing.
Any thoughts for something like this. What am I missing here.
Thanks for the help in advance.