Connect wireless laptop to a Compactlogix network

cirtcele

Member
Join Date
Apr 2007
Location
Illinois
Posts
64
I have a very simple wired network using a L32E processor, panelview plus, HP switch and my laptop. I would like advice on what hardware is needed to connect my laptop wireless instead of plugging in the ethernet cable every time.
 
Simple wireless access point is all you need. You could also use a router as well, they usually have an "access point" mode, or you just have to turn of DHCP. Not much different then wireless at home.

HOWEVER, security is extremely important if this production equipment.
 
I was hoping something as simple as a netgear g54 router might work. Any other suggestions or advice on potential problems using this setup?
 

Similar Topics

I was given this task to connect out PLCs to the network wirelessly so they can use the data that is on the machines. I have ben given the...
Replies
17
Views
4,139
Hello everybody: I am trying to make wireless connection between HMI (eTOP507) and access point (router). Am thinking to connect wireless USB...
Replies
6
Views
4,126
Greetings, I had an issue with a RIO rack 2 and IFM I/O Link dropping on my network. I would loose connection for a second or 2 then they would...
Replies
3
Views
93
Hi friends, i need a help to know the procedure and steps to connect Lenze i700 to PC for parameterize. i tried with lenze easy-starter using LAN...
Replies
0
Views
53
Hi, We have been facing a issue with SCADAPack 474. Configuration is like below. RTU 474 + 6103 PS + 5606 IO Mix Module + 5414 DI Module Only...
Replies
0
Views
73
Back
Top Bottom