psychosunshine
Member
I have a 1398-DDM-009X-DN that was talking to a 1747-SDN in a rack with a SLC 5/05.
Recently, after a download of new parameters to the servo drive. It stopped communicating with the PLC.
The inputs and outputs to and from this servo drive do not appear to be working. All the other devices on the DeviceNet network are working.
The number on the 1747-SDN display is 00 and both LEDs are green. With no errors.
The BCD switches for node address and baud rate, have not changed on the servo drive and are set to the proper settings.
What do I need to do, so the 1747-SDN can see this servo drive?
I tried to connect to the module with RS Networx through the Ethernet port on the 5/05 CPU, with no success.
If I need to use RSNetworx, how do I connect to the network or the 1747-SDN module?
Recently, after a download of new parameters to the servo drive. It stopped communicating with the PLC.
The inputs and outputs to and from this servo drive do not appear to be working. All the other devices on the DeviceNet network are working.
The number on the 1747-SDN display is 00 and both LEDs are green. With no errors.
The BCD switches for node address and baud rate, have not changed on the servo drive and are set to the proper settings.
What do I need to do, so the 1747-SDN can see this servo drive?
I tried to connect to the module with RS Networx through the Ethernet port on the 5/05 CPU, with no success.
If I need to use RSNetworx, how do I connect to the network or the 1747-SDN module?