marlonhiram12
Member
Hello, first of all, I want to say thanks to everyone who is seeing this post.
I have a problem with an SLC 500 5/05 processor. I need to download a program, you guys know that this processor has two channels:
- Channel 0 is for RS-232 Serial Communication.
- Channel 1 is for Ethernet Communication
I'm trying to communicate through RS-232 channel but my RSLINX doesn't see the processor. I click "Auto-Configure" with the Com port selected, but it only says "Unable to verify settings due to packet timeout. Check all cables and configuration and try again"
The driver for the USB RS-232 converter it's working properly, I used the cable to communicate with other PLC and it works.
I also tried to do the ethernet communication assigning an IP to the processor but I can't use the tool BOOTP because the MAC Address doesn't appear.
In the CPU Module, the FAULT led is blinking. I know this means that the processor isn't configurated or doesn't have a program in it.
I don't know what else to do, please help me if you know another way to assign an IP Address.....
I have a problem with an SLC 500 5/05 processor. I need to download a program, you guys know that this processor has two channels:
- Channel 0 is for RS-232 Serial Communication.
- Channel 1 is for Ethernet Communication
I'm trying to communicate through RS-232 channel but my RSLINX doesn't see the processor. I click "Auto-Configure" with the Com port selected, but it only says "Unable to verify settings due to packet timeout. Check all cables and configuration and try again"
The driver for the USB RS-232 converter it's working properly, I used the cable to communicate with other PLC and it works.
I also tried to do the ethernet communication assigning an IP to the processor but I can't use the tool BOOTP because the MAC Address doesn't appear.
In the CPU Module, the FAULT led is blinking. I know this means that the processor isn't configurated or doesn't have a program in it.
I don't know what else to do, please help me if you know another way to assign an IP Address.....