aliceqrd
Member
Hi all,
First a heads up, this is my first time working with Siemens product so please bare with me. We are testing the Siemens Scalance W700 products for overhead rail applications.
Setup: Please see the image: https://drive.google.com/file/d/1ijj0dhWWVk7CuN89d244711bn1S3DP3x/view?usp=sharing
Blue connections are siemens provided cables, and dotted black connections represent Ethernet connections.
Goal: Trying to get the two PLC-s attached the access point to send and receive messages to/from the PLC attached to the client; with the client PLC is reading and sending data to the other two PLC-s.
So far, we checked there are no duplicate IP addresses. Other than that we read through some of the communication set up manual to debug the set up but still there are no communication between the PLC-s.
Grateful for any advice/guidance! Thanks.
First a heads up, this is my first time working with Siemens product so please bare with me. We are testing the Siemens Scalance W700 products for overhead rail applications.
Setup: Please see the image: https://drive.google.com/file/d/1ijj0dhWWVk7CuN89d244711bn1S3DP3x/view?usp=sharing
Blue connections are siemens provided cables, and dotted black connections represent Ethernet connections.
Goal: Trying to get the two PLC-s attached the access point to send and receive messages to/from the PLC attached to the client; with the client PLC is reading and sending data to the other two PLC-s.
So far, we checked there are no duplicate IP addresses. Other than that we read through some of the communication set up manual to debug the set up but still there are no communication between the PLC-s.
Grateful for any advice/guidance! Thanks.
Last edited: