There is also the function DINT_TO_REAL.Hey guys, I have to combine 4 bytes of data and convert them to get a real value. Is there any way to do it in codesys to convert bytes to real value?
Hello Kristof74 and welcome to the forum.Hi everyone,
I would like to connect to this thread because my problem seems to be similar.
I have a PN/PN coupler in the project that will be connected to an unknown network with DCS.
To test, I connected a second PLC and communication worked in both directions. Then I removed the second PLC from the project and set X2 as Outside of project. Now, after loading the project into the PLC, I have the error:
Net configuration error - Difference between nets at slot 1
PNPN Coupler / PNPN Coupler.X1.