traveltyme
Member
Hi!!
Regarding my post December 28th, 2011, 07:25 pm
Believe I found the problem with faulting------ Moved processor to a dif. rack and fault cleared! Powered down, removed processor and re-installed. Fault again! Figured this must be conn. prob. Shure enough, fond a pin on large backplane conn. BENT over touching another pin. Straightened out, re-inserted and now fault is still set and NO comm. Node cant be found. Probably the504 is now gone (but not forgotten!) Question is could rack backplane been damaged? still have pwr. indicators light on my modules
And I'm using df1-1 driver and auto config. successful so linx is trying to talk to the processor-------------
Regarding my post December 28th, 2011, 07:25 pm
Believe I found the problem with faulting------ Moved processor to a dif. rack and fault cleared! Powered down, removed processor and re-installed. Fault again! Figured this must be conn. prob. Shure enough, fond a pin on large backplane conn. BENT over touching another pin. Straightened out, re-inserted and now fault is still set and NO comm. Node cant be found. Probably the504 is now gone (but not forgotten!) Question is could rack backplane been damaged? still have pwr. indicators light on my modules
And I'm using df1-1 driver and auto config. successful so linx is trying to talk to the processor-------------