Barry Kirk
Lifetime Supporting Member
Currently I'm running the following applications.
WinXP SP 3
RS-Linx 2.52
RS-Logix 500 8.00
Panelbuilder 32 Version 3.82
I'm trying to download to a PV1000 through a SLC 5/05.
I'm connected to the SLC via Ethernet. The SLC is connected to the Panelview via RS-232 using RS485 protocol.
I can see the PV in RS-Linx. When I try to upload from the PV it works perfectly.
I'm pretty sure I've got the SLC 5/05 configured properly for pass through and I've got my laptops IP entered into the Routing table in the SLC. I've recently performed a power off reset of the SLC since the routing table was last updated.
But when I try to download to the PV it stops at the stage
Checking Operator Terminal for Compatibility
PB32 than returns with an error code 1030.
Anybody have an idea how to get this to work?
WinXP SP 3
RS-Linx 2.52
RS-Logix 500 8.00
Panelbuilder 32 Version 3.82
I'm trying to download to a PV1000 through a SLC 5/05.
I'm connected to the SLC via Ethernet. The SLC is connected to the Panelview via RS-232 using RS485 protocol.
I can see the PV in RS-Linx. When I try to upload from the PV it works perfectly.
I'm pretty sure I've got the SLC 5/05 configured properly for pass through and I've got my laptops IP entered into the Routing table in the SLC. I've recently performed a power off reset of the SLC since the routing table was last updated.
But when I try to download to the PV it stops at the stage
Checking Operator Terminal for Compatibility
PB32 than returns with an error code 1030.
Anybody have an idea how to get this to work?