First off, I am new to this forum so please bear with me. We currently are running several different brands of plcs and the one that gives the headaches is the Automates. Since these were created in the days of dos, we have to run virtual pc on our laptops to be able to run Win95 for the Automates. I have read that you can run APS in Win2000 and I have done this. The problem is that when going online the database doesn't appear in the logic. I have been told that the batch files have to be rewritten. Here is where I have the problem, no one has told me how hss to be written in the batch file. Does anyone know this answer? Thanks
Need to know how to rewrite batch file
- Thread starter lyled2ga
- Start date
By database, I assume you mean the symbols and comments that normally explain how the program works. These are stored separately from the PLC. You must have an old version of the disk program on a computer file, or you will have to recreate them manually, from a print-out or other hard copy. APS also had a conversion program that updated the database from earlier versions of the program.
Similar Topics
I was wondering if anyone could help i am trying to use a SLC 500 with a 5/05 processor to set up an incremental encoder to a HSCE2 card? The card...
Decided to come to you all to see if any of you have any ideas on how to approach this issue.
I have a 'pack' of product that drops. When that...
I have an old Sentry Palletizer (S/O Number 3007 / Serial Number 1172) that has lost its program as the backup battery died years ago. I can...
So i've been at this for a long while, i have Citect Scada 2018, i have full access to everything but i can't seem to find any option or...
I've got this 3-phase 575V motor that we're controlling with a VFD (Variable Frequency Drive), which has been quite the learning curve in itself...