kittydog42
Member
Is there a way to set the connection timeout for generic ethernet modules to eliminate periodic "IO Faulted - Connection Timeout" messages? This is a pretty rare occurrence, and it only lasts for a brief moment and then goes back to "Running". It happens once a minute or so. The module is functioning properly and I would like to eliminate these messages. The reason it is happening is because I am reading near the maximum number of points.
I changed the RPI to the maximum of 3200ms since this is status data and is not time critical.
I changed the RPI to the maximum of 3200ms since this is status data and is not time critical.