Adding IAI Ethernet Device to Studio 5000 PLC V32.02 - Yellow Triangle

psychosunshine

Member
P
Join Date
Nov 2008
Location
Indianapolis
Posts
152
I'm adding an IAI Gateway with 2 axes connected to it. To an ethernet network on my PLC.

So, I think the math is correct on the Input and Output sizes. But, this module is faulted.

I tried others sizes of 16, 32, etc. None worked.

The gateway counts at 8, and each axis is also 8. So, that's 24. The manual says to use 100 and 150, as shown. And, DATA - INT for the Comm Format.

Any ideas?
 

Attachments

  • Capture50.PNG
    Capture50.PNG
    83.3 KB · Views: 5
  • Capture53.PNG
    Capture53.PNG
    19.6 KB · Views: 6

Similar Topics

Z
Adding new 18mm interlock switch to a circuit
Hi, I need help adding a new interlock switch to an existing circuit. I have never done on the existing circuit. I did set it up on the...
Replies
6
Views
258
ziyaddin2015
Z
S
Adding a RFID to a 15” comfort pro
Hi all I’m looking at adding a RFID card reader to comfort panel pro , how do you set the rfid up can you connect to existing users and password...
Replies
0
Views
88
stu
S
S
TIA-portal - Adding connection to HMI in a different project
Hello all! So I have one project with a S7-1214 and a MTP1500 "Project1" and one project with another S7-1214 "Project2". Both of these PLC:s need...
Replies
6
Views
140
swedeleaner
S
C
Adding PanelView Plus 7 to the network
Hi Everyone, Currently we have three plants running with Controllogix PLCs (L72, L73, L74). In each of these plants we have 2 FTView SE...
Replies
0
Views
118
celso3093
C
B
Adding IB16S to the IO configuration - Logix Designer v31
Hello, Im building project with 1756-L82ES controller and 1756-IB16S card but i cant find it when trying to add the card to IO configuration...
Replies
3
Views
194
robertmee
R
Back
Top Bottom