Drewster1123
Member
really strange issue. The panelview(2711p-T10C22D9P) will try to load an application and get stuck on "Starting Alarms".
If I reboot the terminal, unplug the ethernet cord connecting the HMI to the PLC, and run the application. it will load up fine.
Plug the ethernet back in and the comms return and the HMI runs.
has anyone experienced this before?
If I reboot the terminal, unplug the ethernet cord connecting the HMI to the PLC, and run the application. it will load up fine.
Plug the ethernet back in and the comms return and the HMI runs.
has anyone experienced this before?