Kroger2013
Member
Hello all,
I am needing to upgrade a Panelview 550 to a Panelview Plus 600. The current Panelview 550 uses DH-485 and the RS 232 port on the SLC 5/03 is dedicated to a motion controller on the machine so it is not an option. From what I have researched, I will need a 1761-NET-AIC device between the Panelview 600 and the SLC 5/03. I will also need a 2711-NC21 cable that will go between the Panelview 600 and the 1761-NET-AIC device.
Is there anything else that I am missing here? I have never had to do this before so I am just looking for advice on what to expect when I finally dive into doing this . Thanks.
I am needing to upgrade a Panelview 550 to a Panelview Plus 600. The current Panelview 550 uses DH-485 and the RS 232 port on the SLC 5/03 is dedicated to a motion controller on the machine so it is not an option. From what I have researched, I will need a 1761-NET-AIC device between the Panelview 600 and the SLC 5/03. I will also need a 2711-NC21 cable that will go between the Panelview 600 and the 1761-NET-AIC device.
Is there anything else that I am missing here? I have never had to do this before so I am just looking for advice on what to expect when I finally dive into doing this . Thanks.