Mitsubishi FX-128mt cable pinout

karlag

Member
K
Join Date
Mar 2006
Location
Canada
Posts
81
o_O Does anybody have pinout for cable for communications to plc to pc(fx-128mt) it has 25pins on PLC side. Thank you!
 
Cable you need is SC09. It's not a simple pinout, as the PLC end is RS422. There is electronics inside the cable to convert RS232 (PC end) to RS422 (PLC end).
 

Similar Topics

E
How to get data from multiple Mitsubishi Q03UDVCPU into master PLC Q03UDVCPU through QJ71E71-100 ?
Hi, How to get data from multiple Mitsubishi Q03UDVCPU into master PLC Q03UDVCPU through QJ71E71-100 ?
Replies
1
Views
25
parky
P
K
Mitsubishi F800 Control Via Ethernet IP
So the customer purchased a Mitsubishi drive, in the same project for a different pump they got an ABB drive, was literally whatever they could...
Replies
1
Views
55
kdean94
K
C
AOI to Mitsubishi FB?
hi all, I'm wondering if anyone has ever converted an Allen Bradley AOI to a Mitsubishi Function block. I's hard to find libraries from...
Replies
3
Views
171
parky
P
H
Mitsubishi FX3G PLC with Beijer HMI E615
Hello, I have a Mitsubishi FX3G 14M PLC and a E615 HMI from Mitsubishi/Beijer. I'm using GXWorks 2 to do the programming and I have no problem...
Replies
4
Views
189
NicoSz
N
S
MITSUBISHI ALPHA AL2-24MR-D Controller
Hello! If someone can help me with the following problem. I can't change the phone number. Do I really need the interface (AL-232CAB - Programming...
Replies
0
Views
79
soro4gsm
S
Back
Top Bottom