I am trying to communicate with a Moxa Ethernet to serial converter that is going out to a Modbus device. I have my Moxa set up with an IP of 192.168.1.98 port 4001. I have my MSG instruction set up as
1(integral, Modbus TCP)
03 Read holding registers
trying to poll 1 element @16bit
I have a valid RI11:0 entered
IP of 192.168.1.98 and port 4001
I keep getting a fault code ff and the description is local communication channel is shutdown. I have Modbus tcp enabled under channel 1 configuration and have the channel 1 Modbus tab at the top.
What am I missing or doing wrong?
Thanks
1(integral, Modbus TCP)
03 Read holding registers
trying to poll 1 element @16bit
I have a valid RI11:0 entered
IP of 192.168.1.98 and port 4001
I keep getting a fault code ff and the description is local communication channel is shutdown. I have Modbus tcp enabled under channel 1 configuration and have the channel 1 Modbus tab at the top.
What am I missing or doing wrong?
Thanks