Fault link blinking in GE Fanuc IC200PNS002-AC Versamax Network Interface Module

kharayat

Member
Join Date
Feb 2024
Location
Barei
Posts
7
I have one GE Fanuc IC200PNS002-AC Versamax Network Interface Module and the fault red light is blinking and i have checked in manual it is written that this problem is of invalid mac address. Anyone help me with this please.
 
Please describe the overall system architecture and what happened just before the fault light started blinking, ie, power outage, component replacement, fiber optic cable repair, etc. Have you used the profinet discovery tool in Machine Edition software to communicate with it?
 
Please describe the overall system architecture and what happened just before the fault light started blinking, ie, power outage, component replacement, fiber optic cable repair, etc. Have you used the profinet discovery tool in Machine Edition software to communicate with it?
I don't know what happened but fault light is blinking and one more thing i have not used profinet discovery tool. Actually the ethernet cable is not detecting in my laptop. The cable is ok, laptop port is ok and at component level also i have checked it but ports are ok.
 

Similar Topics

Hello frnds i have Rockwell system L63 with four Chassis A,B,C and D with controlnet network.i have some SOE module installed in four chassis and...
Replies
2
Views
2,061
We had a site where a rat gnawed through some fiber optic cables which (obviously) prevented communication to a remote rack entirely. We, and the...
Replies
3
Views
84
Good morning everyone I’m currently working on a omron device net and have a nord drive that fell off the network. I have limit knowledge in...
Replies
2
Views
88
Hi. We've been asked to do an upgrade on plant, consisting on a PLC upgrade. This involves replacing a 1747-SDN module to a 1769-SDN, in a network...
Replies
0
Views
68
in allen bradley kinetix 300 drive first E31 error shows after resting drive E11 error occurs need solution to reset E11 fault code
Replies
4
Views
159
Back
Top Bottom