configuration compact logix L32E plc with S4M00-2004-0200T zebra printer on ethernet

sahebanna

Member
S
Join Date
Nov 2009
Location
Bangalore
Posts
16
Hi friends,
I want to configure compact logix L32E PLC with S4M00-2004-0200T Zebra printer on ethernet network, and i want to send some data from PLC to printer, so how to do the configuration and how to send the data (in what format) from plc to printer? please help me on this. if you have same configuration example programs is very helpful for me.
 

Similar Topics

R
Issue with IP configuration of compact logix
hey guys, I have L32E compact logix processor installed in my facility & it happened to fail abruptly.Subsequently I replaced it with a new...
Replies
3
Views
3,076
Geoff White
G
O
Micromotion 1700 Configuration
I've been fighting with a Micromotion 1700. Can't get into the configuration area. It's as if the optical sensors are disabled or locked out...
Replies
1
Views
57
tdoa
T
H
RSLinx Bridge Configuration? Connecting through another PLC
I have 2 PLCs. One is networked to our plant, and the other is networked to the first PLC via a 1756-EN2T. I could easily get the second PLC...
Replies
3
Views
69
dmroeder
dmroeder
A
Kinetik 300 -2097-V33PR3 Master and Slave Configuration
Hi i using Kinetik 300 2097 driver control by EIP with using move absolute and incremental for motion , but i want to add same driver and motor as...
Replies
0
Views
76
Ansonkiek
A
A
45DMS-B8LAT1-D4 configuration
Hello I have a sensor that I read data with IO-LINK but I don't know how to get my data. I see that I have two modes : Process data Map0 and Map...
Replies
0
Views
76
ahmeduqat
A
Back
Top Bottom