help please, old uniop hmi !!!

kevbloke

Member
Join Date
Jul 2004
Location
Kent uk
Posts
81
Hello chaps, i have an old uniop ek12 hmi, i also have designer 6 software but it would appear that this isnt what i require. can anyone point me in the right direction please.
 
Put your panel into configuration mode and attempt an upload from the designer software. If you are not in configuration mode, Designer won't 'talk' to the HMI.

I only have Designer 5, so it may not be all the same, but i've never had problems connecting once the panel was in the right mode. This includes a model that wasn't on the list of HMI panels.
 
Dear friends,
I,ve uploaded a project from a uniop (ek-04) and download it to a new idetical one using designer6, all is alright!.. but the problem is that when i download the project(while the uniop in cofig. mode) , the downloading in pc side is achieved successfully but the uniop screen become empty when download is complete!..when i turn it off and power it on , the texts on the screen appear (self test ..the.. uniopver4.40 operation mode) then the screen become empty and no text or software appear on it!..
please help me to solve this problem...
john
 
Dear John,

you better start a new thread with this question in stead of reviving and hijacking at least 11 old threads (as far as I can tell). I'm sure you'll find your information faster that way.

Regards,
 
Dear Freinds,

I need designer 6 software to upload program from Uniop eTop 305 HMI.

I will appriciate if you can provide a link or send installation file please.
 

Similar Topics

Ok, my parents own a dry cleaner and the main machine broke. THey said we need to replace the main PLC, which is a Mitsubishi Melsec FX2N-64MR...
Replies
8
Views
3,548
Please help me, I have solve many week but still not solve it. I found trouble of factory talk studio when I set tag by browse address of OPC...
Replies
0
Views
80
Hello Everyone, i Have im my Industry a Endress & Hauser Promag400 this has a screen that constantly have that error, it says to wait, somebody...
Replies
2
Views
427
After replacing the 70 with the 525, the PLC can read from the drive and recognizes it as online, but no commands are being listened to. PLC is...
Replies
1
Views
494
To quickly test a plc output which is wired to a relay do I dob a cable between the output and 24vdc+ source I.e something with 24vdc+ live such...
Replies
6
Views
633
Back
Top Bottom