Cunk
Member
- Join Date
- May 2004
- Posts
- 3
I'm trying to connect a Turck 2-wire inductive prox sensor (Bi1.5-G08M-AD6X-H1341) into an NPN input (on a Triangle Research T100MD888+ PLC if it helps to know).
When the sensor is triggered I'm measuring 4.6 V across it. According to the PLC's manual, 0-5 V is considered active but I suspect that I'm cutting it too close with the 4.6 V.
Is there any way I can get this to work? Sorry if I haven't supplied enough info or if I've confused you with my description. I'm fairly green when it comes to this stuff. Let me know if you need more info.
When the sensor is triggered I'm measuring 4.6 V across it. According to the PLC's manual, 0-5 V is considered active but I suspect that I'm cutting it too close with the 4.6 V.
Is there any way I can get this to work? Sorry if I haven't supplied enough info or if I've confused you with my description. I'm fairly green when it comes to this stuff. Let me know if you need more info.