Problem with RS View and SLC 5/05

Eugenio

Member
E
Join Date
Mar 2007
Location
Juncos
Posts
25
now I'm trying to connect my panel view via Ethernet but when I do the test run application doesn't read all the tags

BUT if I do the connection via serial it works fine:confused:


this can affect in any form my connection between the PV+ and the PLC?
 

Similar Topics

J
RSview and SLC 505 Coms Problem.
Hi all Having problems with communications to RSView32. It all started last week when I had an error on the SLC and had to reset it, it looked...
Replies
2
Views
1,675
Geospark
Geospark
S
Weird problem with slc 5/04 and panelview +
Hey Guys, I have even contacted rockwell tech support about this, and they seem just as stumped as I am. I have upgraded the panelview on an old...
Replies
8
Views
3,668
Shiro485
S
B
Panelview 600 and SLC 5/05 communication problem
Hi, I have a panelview 600 DF1 232 model trying to have it communicate with an SLC 5/05. The PV is using a straight through cable plugged into...
Replies
6
Views
5,896
Ken Roach
Ken Roach
S
slc 5/04 serial comm problem with panel view plus 600
dear all, i need help, i have a slc 5/04 connected to a programmed panel view plus 600 serial 232 port df-1, when the pvp resets its message...
Replies
9
Views
11,832
AdrianCap
A
M
PanelView 900 SLC 05/2 Communication problem
System comprising SLC 5/02 CPU. Panel View 900, 2711-T9A2. Ser E, Rev A, Frn 2.02. Fault: Panel view not transfering Command to move motors...
Replies
8
Views
4,394
micgent
M
Back
Top Bottom